Does your deck look dirty, washed out, faded or cracked? We’ll take care of it! We apply the best staining and sealing materials that are water-resistant, mold-resistant, and protect against UV rays.

Our Standard Process:
1.- Scrape the wood surface to remove dirt and loose paint.
2.- Deep power wash to remove dust and loose material that has remained after peeling the surface.
3.- Sand the areas that are necessary to create a smooth surface ready for staining.
4. Cover surfaces that do not need to be painted or stained with tape, plastic, paper and canvas to protect them from any staining accident.
5.- Use high-quality stain or paint products that come with a warranty of two years per contract*.
6 .-Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back to its original place.
7.- Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

The most common problems you will have with stucco siding is the damage generated by water. If the damage is not repaired on time, there are many high-risk accidents that humidity can cause. Our professionals are ready for any repairs and painting your building may need, including cracks or stains.

Our Standard Process:
1.- Evaluate and identify the different types of grooves and their cause to plan restoration accordingly.
2. – Conduct a deep power wash to remove dust and loose material that has remained after peeling the surface.
3.- Apply elastomeric/waterproof primer on your stucco to cover the areas that have been repaired, leaving a smooth finish ready to paint.
4.- Apply one to two coats of paint that, in addition to making your property look new, will help preserve the stucco and prevent new cracks.

Has it been a while since you last had a deep power wash, and you want your home to look more presentable? We power wash to remove the dust, mold, old paint, or any dirt that is present on the house. Besides it being an important prepping step, this allows the fresh paint to stick and distribute well on the surface.

Many houses were built before 1980. If your home is one of them, it is likely that it was painted with lead-based materials. In order to paint your home, you must have a certificate issued by The Environmental Protection Agency. At INMARS we are certified in lead painting, so you can rest assured that we will work with the regulations established by the EPA.

Selecting the perfect color and finish for your home will help your mood while protecting your walls from humidity and mold. At INMARS PAINTING we’re experts in painting walls, ceilings, trim, windows, doors, crown moldings, and any type of material anywhere in your house such as the foyer, hallways, staircase, living room, dining room, kitchen, bathroom, porch, basement, studios, and garages.

Our Standard Process:
1.- Select a color for each room. We understand that sometimes the color selection process may be a bit overwhelming for the client. That is why we offer a color consulting service with some of our interior design experts who will guide you in finding the perfect color or colors. If you plan to paint your home with the original color, we will need a can of old paint (if available) or a paint sample to provide a color match.
2.- Cover furniture with plastic, as well as the floors with paper and or drop cloths and cover windows, doors, and each of the areas that will not be painted.
3.- If necessary, prime the surface to leave a smooth even canvas that paint can later adhere to.
4.- Apply one to two coats of high-quality paint on our surface with a 3- year warranty.
5.- Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back.
6.- Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

Are your cabinets starting to look worn out or old? Are you wondering what the cost of replacing them might be? We have excellent news for you! With INMARS PAINTING you will save a lot of money and make your cabinets look brand new without the need to replace them. When you paint or stain your cabinets, they are protected from humidity and it gives them more lifespan.

Our Standard Process:
1. Uninstalling doors and drawers on the cabinets to paint them separately.
2. Sand surfaces to prepare them for painting.
3. Apply one coat of primer (if necessary) on doors, drawers and frame of the cabinets to make the paint finish long-lasting.
4. After we apply one to two coats of paint or stain (depending on the finish) both on doors, drawers, and on the mounted cabinets.
5. When painting is complete we put the cabinets back together.
6.Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back.
7. Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

The problem we see the most is damage to the drywall of your home. It can occur from minor accidents when moving some furniture, nail removal, and cracks caused by moisture. If this is your case, we have professionals to repair them with high-quality skills and materials.

Our Standard Process:
1. Mark the surface around the damaged area.
2. Cut out a piece of new drywall the same size as the damaged area and place it inside the space to be repaired.
3. Put drywall joint tape and joint compound around the affected area.
4. Let the area dry and sand the repaired surface.
5. Apply primer and paint on the repaired area.
6. Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back.
7. Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

Removing wallpaper without the correct tools can be a difficult task that can put you through a lot of frustration.

Our professionals are trained and prepped with the appropriate tools to remove wallpaper from your walls and repair any minor flaws that remain on the walls after removal, leaving them ready to be painted.

Our Standard Process:
1. Remove the wallpaper in a manner that does not damage the walls of your home.
2. Repair any damage caused by removing the wallpaper and smooth the surface by sanding.
3. Prep and prime, leaving the walls ready to paint.

Planning on painting woodwork in your home? Notice that there are damaged, rotten, or broken areas? We can help. We have professional wood repair and replacement services to leave any damaged areas looking new. We service indoor & window trim, crown molding, ceiling molding, banister restoration, etc.

A common problem with stucco siding is the damage generated by water. If the damage is not repaired in time, there is a high risk of accidents that humidity can cause. Our professionals are ready for any repairs and painting your building may need, including cracks or stains.

Our Standard Process:
1.- Evaluate and identify the different types of grooves and their cause to plan restoration accordingly.
2. - Repair cracks and stains by applying stucco on the damaged areas.
3.- Apply elastomeric/waterproof primer on your stucco to cover the places that have been repaired, leaving a smooth finish, ready to paint.
4.- Apply one to two coats of paint that, in addition to making your property look new, will help preserve the stucco and prevent new cracks.

If a lot of time has passed since you last had a deep power wash and you want your business to look more presentable, then give us a call! We make sure to remove any dust, mold, old paint, or dirt that is present on the building. In addition to being an important prepping step, it allows the fresh paint to be able to stick and distribute well on the surface.

Painting your business with the perfect color and finish will establish the mood within the office or meeting room in which you are in. Also, with new paint, you will protect your walls from moisture and mold. At INMARS PAINTING, we are experts in painting walls, ceilings, trim, windows, doors, crown moldings, etc of any material and anywhere in your business.

Our Standard Process:
1.Select the color for each room. We understand that sometimes the color selection is something overwhelming for you. That is why we also have a color consulting service with some of our interior design experts who will guide you in finding the color or colors that complement your business. If you plan to paint your business with and stick with the same color, we have the ability to match the current color of the walls.
2.Cover furniture with plastic and the floors with paper and drop cloths, making sure to cover windows, doors, and areas that will not be painted.
3.- When necessary, prime the surface to give it an even surface for the paint to later adhere to.
4.- We then begin to apply one to two layers of high-quality paint, which come with a 3 year warranty.
5. Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back.
6. Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

A situation that happens often is damage to the drywall of your building. It is so common it can occur from minor accidents when moving furniture, nail removal, and cracks caused by moisture. If this is your case, we have professionals to repair them with high-quality skills and materials.

Our Standard Process:
1.- Mark the surface around the damaged area.
2.- Cut out a piece of new drywall the same size as the damaged area and place it inside the space to be repaired.
3. Place mass around the affected area and tape that serves as packaging, apply mass again on the entire new surface.
4. Let the area dry and sand the repaired surface.
5. Apply primer and paint the repaired area.
6.-Clean up materials and tools used during the project at the end of each workday. Any objects moved during the painting process will be put back.
7.- Upon job completion, a walkthrough will be done with the client to review the project. If touch ups are needed, arrangements will be made to meet quality standards.

Removing wallpaper without the correct tools is a very tedious task that can put you through a lot of frustration. Our professionals are trained and prepped with the appropriate tools to remove wallpaper from your home and repair any minor flaws that remain on the walls after removal, leaving them ready to be painted.

Our Standard Process
1. Carefully remove wallpaper in a manner that does not damage the walls of your home.
2.-Repair any damage caused by removing the wallpaper and smooth the surface by sanding.
3.- Prep and prime, leaving the walls ready to paint.

If painting wood, metal, or vinyl with damaged areas, we can help. We offer professional carpentry services to leave any damaged areas looking new again. We service indoor window trim, crown molding, ceiling molding, banister restoration, etc.